CC2 Control compares a spool's colour exactly with the tray's, which is the
tag's colour from the display palette (e.g. #F72221 for Spoolman's #FF0000),
and flags the slot or asks again when they differ. New copies take the
tag's colour; copies in a slot are set to the tray's colour, others keep
theirs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014GcEk5tkfFSYD6NTF66NkC
- /s/<id> shows a spool: rest in Spoolman and CC2 Control, where it is,
last booking, history, links to Spoolman and the tag generator.
- Setting "Adresse der Bridge"; the tag generator can put <address>/s/<id>
on the tag, so an iPhone held to the roll opens that page.
- New spool: vendor and material chosen from Spoolman, the vendor's
filaments offered, values taken from similar filaments, duplicates
pointed out and never created twice.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014GcEk5tkfFSYD6NTF66NkC
- Master data of CC2 Control's copies follows Spoolman (name, brand,
colour, diameter, density, net, tare, price; not the material, which was
fitted to the tray).
- A loaded spool's rest in CC2 Control is set to Spoolman's via
/api/spools/adjust once everything is booked (old copy after the roll
printed in the other printer, weigh-in in Spoolman); the resulting
correction is not booked back.
- Copies of spools archived or deleted in Spoolman are deleted from CC2
Control when no tray holds them (library limit 128); an outage never
counts as deleted.
- A roll that ran out is archived in Spoolman (setting, default on); a
scan of an archived spool maps nothing.
- A roll scanned again with unchanged tag data and put back into its old
slot (after printing in the other printer) is recognised.
- Tag generator: "Neue Spule" creates spools in Spoolman from an existing
or a new filament (and vendor), labelled vendor + id, then opens the tag.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014GcEk5tkfFSYD6NTF66NkC
- A roll that ran out is set to 0 g in Spoolman (like a weigh-in) instead
of booking CC2 Control's delta, so a mirror whose count was off cannot
book too much or too little.
- A tray that printed while CC2 Control still asked which spool it holds
(untagged roll) shows the waiting millimetres on the status page and
gets one log warning after the print.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014GcEk5tkfFSYD6NTF66NkC
A fresh instance (empty data volume, no printers configured yet) treated
every spool whose "drucker" field named a printer as stale and moved it to
storage. Now only spools at our slot locations or naming a printer this
bridge runs or has written are corrected; written printer names are kept
in the state (seeded from the applied locations on update).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014GcEk5tkfFSYD6NTF66NkC
Redesigned status, log, tag generator and settings pages: spool rings in
filament colour, live job card (progress and time left read from CC2
Control's /api/printer while a job runs), log page with filters, iOS-style
settings with a write/dry-run switch. On phones: bottom tab bar, printer
switcher, slot details in a bottom sheet. Dark mode follows the system.
Web app manifest and home screen icons for "Add to Home Screen".
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014GcEk5tkfFSYD6NTF66NkC
- A roll put back into the slot it left, with the tag data unchanged, is
mapped again and CC2 Control's question answered; if the touchscreen then
replaces the id, it was another roll and goes to storage.
- A touchscreen edit of a scanned roll keeps the mapping and re-answers
CC2 Control's question so its use is counted.
- Bookings name the print and its result from CC2 Control's log.
- A weigh-in in CC2 Control sets Spoolman's remaining weight instead of
being booked as use.
- After "Take out" with the roll still in the tray, the tray's logged use
is booked to that roll until it leaves.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014GcEk5tkfFSYD6NTF66NkC
- One worker per printer (name, IP, CC2 Control URL, own pinned host key);
a spool sits in at most one slot of one printer, moves between printers
- Spoolman: location "<printer> Slot N" plus extra fields "drucker"/"slot"
(created by the bridge), cleared and "Lager" on removal
- Full comparison every minute: the printer wins over manual edits of loaded
spools; stale printer locations go to storage; own locations untouched
- Automatic migration of v1 settings, state and host key
- Status hint when a tag is still in a tray but unmapped (e.g. after
"Take out" in CC2 Control)
- SSH test: connection drops during exec give a clean error, not a 500
- Mock environment with several printers; tests for all of the above
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014GcEk5tkfFSYD6NTF66NkC
- Reads /opt/usr/canvas_record_info.json over SSH (pinned host key,
restricted key), decodes Spoolman spool ids from the tag weight
- Mirrors spools into CC2 Control's spool library and assigns slots,
keeps its own slot mapping, sets Spoolman locations
- Books the drop of CC2 Control's measured remaining weight to Spoolman
after each print, idempotent across restarts and interrupted bookings
- Dry-run by default; web UI for settings, SSH key, status and log
- Tag generator for NFC Tools command chains (NTAG213/215/216)
- Tests, mock environment, Dockerfile, Gitea Actions CI
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014GcEk5tkfFSYD6NTF66NkC
